The design of this rocket is entirely of my own design and was not based on any existing rocket or kit. All of the dimensions and features were chosen in an attempt to achieve the goals stated in post titled
Read morePreliminary Design
Features and Dimensions 134.5in (3.417m) tall 6.22in (158mm) outside diameter, 6.0in (152mm) inside diameter, fiberglass-wrapped phenolic airframe tubes Center of pressure 105in (2.667m) down from tip of nosecone With Aerotech DMS M1350W, center of mass 95in (2.413m) down from tip of
Read moreLevel 3 Certification Rocket Design Goals
Design Goals The design goals or requirements for the Level 3 Certification Rocket Project are as follows:
Read more